價格：免費
更新日期：2016-01-19
檔案大小：2.7M
目前版本：1.0.2
版本需求：Android 4.1 以上版本
官方網站：http://www.ophiropt.com/laser-measurement
Email：jonathan.feust@ophiropt.com
Bring Laser power and energy measurement to your Smartphone / Tablet via the Juno or Quasar devices from Ophir Optronics:-
Juno - http://www.ophiropt.com/laser--measurement/laser-power-energy-meters/products/pc-interface/juno
Quasar - http://www.ophiropt.com/laser--measurement/laser-power-energy-meters/products/pc-interface/quasar
StarViewer allows you to display the laser measurement in a time-based line graph, as a needle display, or large numeric display with statistics. You can also perform a screen capture and share it. Great for field technician's reporting results back to the lab.
StarViewer can be used with any standard Ophir Thermopile, Photodiode, or Pyroelectric PE-C sensor.
The measurement settings are fully configurable by opening the settings panel at the left of the screen.
StarViewer can be used with the Juno via your device's USB on-the-go (OTG) port,
or via Bluetooth with the Quasar.
Requirements:
Android version 4.1.0 or higher
For use with the Juno:
* Smartphone/Tablet capable or providing 100mA or more downstream current on its USB OTG port.
* Micro USB to Type A Female Adapter (between the OTG port and the Juno cable)
* The Juno must have a minimum firmware version 1.39 or higher (available from our web site)
For use with the Quasar:
* Bluetooth capability on the Smartphone/Tablet
* PIN code for Bluetooth pairing is 1234
* Note: StarViewer does not support measurement with Pyroelectric sensors with the Quasar
The following Android devices have been tested with StarViewer :-
*** Smartphones ***
Manufacturer / Model (Android version)
LG G2 (4 4.2 and 5.0.2)
LG G3 (5.0.0)
LG Google Nexus 5 (6.0.1)
Motorola Moto G (2nd gen) (5.0.2)
Samsung Galaxy S5 (4.4.2)
Xiaomi Redmi Note 2 (5.0.2)
*** Tablets ***
Manufacturer / Model (Android version)
LG G Pad 8.3 (5.0.2)
Asus Google Nexus 7 (5.0.2 and 5.1 and 6.0.1)
Samsung Google Nexus 10 (5.0.1)
